Product Description
Product Description
GWSP Oil free Scroll Vacuum Pump
Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.
Basic informations:
1) Model: GWSP75 Oil free scroll vacuum pump
2) Ultimate vacuum pressure: 8.0Pa/0.08 mbar (abs.)
3) Max suction capacity: 50Hz-1.0L/s 60Hz-1.2L/s
Safety Precautions:
The GWSP series oil free scroll vacuum pumps are suitable for clean processes only.
Do not pump toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on pumps which have used special gases or other hazardous substances.
Be sure the inlet gas temperature must be lower than 122 °F.
Technical Specifications
Technical Specifications:
| Model | GWSP40 | GWSP75 | GWSP150 | GWSP300 | GWSP600 | GWSP1000 | ||
| Displacement | 50Hz | l/s | 0.5 | 1.0 | 2.0 | 4.3 | 8.7 | 16.6 |
| m3/h | 1.8 | 3.6 | 7.2 | 15.5 | 31.3 | 59.8 | ||
| cfm | 1.1 | 2.1 | 4.3 | 9.3 | 18.7 | 35.8 | ||
| 60Hz | l/s | 0.6 | 1.2 | 2.4 | 5.1 | 10.4 | 20.0 | |
| m3/h | 2.2 | 4.3 | 8.6 | 18.3 | 37.4 | 71.6 | ||
| cfm | 1.3 | 2.5 | 5.1 | 10.9 | 22.3 | 42.8 | ||
| Ultimate Pressure | Torr | ≤1.1*10-1 | ≤6.0*10-2 | ≤4.5*10-2 | ≤1.9*10-2 | ≤7.5*10-3 | ≤7.5*10-3 | |
| psi | ≤2.2*10-3 | ≤1.2*10-3 | ≤9.0*10-4 | ≤3.8*10-4 | ≤1.5*10-4 | ≤1.5*10-4 | ||
| Pa | ≤15 | ≤8 | ≤6 | ≤2.6 | ≤1 | ≤1 | ||
| mbar | ≤1.5*10-1 | ≤8.0*10-2 | ≤6.0*10-2 | ≤2.6*10-2 | ≤1.0*10-2 | ≤1.0*10-2 | ||
| Noise Level | dB(A) | ≤54 | ≤57 | ≤57 | ≤60 | ≤61 | ≤65 | |
| Leakage | mbar·l/s | 1*10-7 | ||||||
| Max. Inlet/Exhaust Pressure | MPa | 0.1 / 0.13 | ||||||
| Ambient Operation Temp. | ºF | 41~104 | ||||||
| Motor 1 phase | Power | kW | 0.25 | 0.55 | 0.55 | 0.55 | 0.75 | -- |
| Voltage | V | 110~115 (60Hz),200~230 (50Hz) | -- | |||||
| Speed | rpm | 1425(50Hz),1725(60Hz) | -- | |||||
| Plug | North America, Europe, UK/Ireland, India | -- | ||||||
| Motor 3 phase | Power | kW | -- | 0.55 | 0.55 | 0.55 | 0.75 | 1.5 |
| Voltage | V | -- | 200~230 or 380~415 (50Hz),200~230 or 460 (60Hz) | |||||
| Speed | rpm | -- | 1425 (50Hz),1725 (60Hz) | |||||
| Inlet/Exhaust Flange | KF25/KF16 | KF40/KF16 | KF40/KF16*2 | |||||
| Dimensions | 1 phase | mm | 326*212*253 | 450*260*296 | 455*260*296 | 493*297*334 | 538*315*348 | -- |
| 3 phase | mm | -- | 450*260*296 | 455*260*296 | 493*297*334 | 538*315*348 | 576*450*402 | |
| Net Weight | 1 phase | kg | 15 | 21 | 22 | 29 | 36 | -- |
| 3 phase | kg | -- | 20 | 21 | 28 | 31 | 54 | |
| Cooling Type | Air cooled | |||||||
| Others | With air flush | |||||||
Features & Benefits
Features & Benefits:
No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 3~60 m3 /h, limited vacuum level 1~8 Pa
Suitable for all type of power supply around the world.
110/220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance
Quality Control
CMM inspection system assures
fixed tolarance on dimension&shape
Pump Testing
Applications
Analyzing instrument and device.
Spectroscopy/scHangZhou electron microscopy.
Space environment simulation machine.
Helium Leak detector.
Mass spectrometer.
Cryopump regeneration.
Accelerators/synchrotrons.
Food and drug industry.
Freezing dryer.
Vacuum storage.
Medical equipment
Low temperature plasma sterilizer.
Vacuum storage.
Dental equipment.
Vacuum equipment.
Oil free ultrahigh vacuum unit
Oil free vacuum unit
Company Profile
Company Profile
GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.
FAQ
Question&Answers
Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products by ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Years |
| Oil or Not: | Oil Free |
| Structure: | Scroll Pump |
| Exhauster Method: | a Pair of Vortex Plates |
| Vacuum Degree: | Low Vacuum |
| Customization: |
Available
|
|
|---|
Are there variations in scroll vacuum pump designs, and how do they affect performance?
Yes, there are variations in scroll vacuum pump designs, and they can have an impact on the performance of the pump. Here's a detailed explanation:
Single-Stage and Multi-Stage Designs:
Scroll vacuum pumps can be classified into single-stage and multi-stage designs:
- Single-stage: Single-stage scroll pumps have a single set of orbiting and fixed scrolls. They are typically used for applications where moderate vacuum levels and pumping speeds are required. Single-stage pumps are known for their simplicity, compactness, and quiet operation.
- Multi-stage: Multi-stage scroll pumps consist of multiple sets of orbiting and fixed scrolls arranged in series. Each stage provides additional compression, allowing for higher vacuum levels and faster pumping speeds. Multi-stage pumps are suitable for applications that require deeper vacuum levels or higher pumping capacities.
The choice between single-stage and multi-stage scroll pumps depends on the specific application requirements and desired performance characteristics.
Oil-Free and Oil-Sealed Designs:
Scroll vacuum pumps are available in both oil-free and oil-sealed designs:
- Oil-Free: Oil-free scroll vacuum pumps do not require lubricating oil in the pump chamber. They are suitable for applications that demand a clean and oil-free vacuum environment to prevent contamination or interference with sensitive samples or processes. Oil-free pumps are often preferred in laboratory, research, and semiconductor applications.
- Oil-Sealed: Oil-sealed scroll vacuum pumps utilize oil as a lubricant and sealing medium. The oil helps provide a better seal between the scrolls and contributes to improved performance in terms of vacuum level and pumping speed. Oil-sealed pumps are commonly used in industrial, manufacturing, and rough vacuum applications.
Both oil-free and oil-sealed scroll vacuum pumps have their advantages and considerations, and the selection depends on the specific requirements of the application.
Other Design Considerations:
In addition to the above variations, scroll vacuum pumps may have other design considerations that can affect their performance:
- Pump Size: Scroll pumps are available in different sizes, offering a range of pumping capacities and physical dimensions. The pump size influences the pumping speed and the size of the vacuum system it can handle. Smaller pumps are more compact and suitable for applications with lower flow rate requirements, while larger pumps provide higher pumping speeds.
- Motor Rating: The motor rating of a scroll vacuum pump determines its power output and affects the pumping speed and performance. Higher motor ratings generally result in faster pumping speeds and may be necessary for certain demanding applications.
- Control and Monitoring Features: Some scroll vacuum pumps may include advanced control and monitoring features, such as integrated controllers, digital interfaces, and performance indicators. These features can enhance the pump's usability, provide real-time data, and facilitate system integration.
It is important to refer to the manufacturer's specifications and guidelines for specific scroll vacuum pump models to understand the design variations and their impact on performance. The manufacturer can provide detailed information on the pump's capabilities, limitations, and recommended applications.
By selecting the appropriate scroll vacuum pump design based on the application requirements, it is possible to achieve optimal performance and efficiency in various vacuum processes.
Do scroll vacuum pumps require water cooling or air cooling systems?
Scroll vacuum pumps can be designed to utilize either water cooling or air cooling systems. Here's a detailed explanation:
Water Cooling Systems:
Some scroll vacuum pumps are equipped with water cooling systems to dissipate the heat generated during operation. Water cooling offers efficient heat removal and helps maintain the pump at optimal operating temperatures. These pumps typically have connections for water inlet and outlet, allowing the circulation of cooling water through the pump's heat exchanger or jacket.
Water cooling systems are commonly used in applications where the pump operates at higher duty cycles or when the ambient temperature is relatively high. They are particularly advantageous when there is a need for continuous or extended operation at elevated vacuum levels, as water cooling provides effective heat dissipation and prevents overheating of the pump.
Air Cooling Systems:
Alternatively, some scroll vacuum pumps utilize air cooling systems. These pumps rely on the circulation of ambient air to dissipate the heat generated during operation. Air cooling systems typically incorporate cooling fins or fans to enhance heat transfer and maintain the pump within the acceptable temperature range.
Air cooling systems are commonly used in applications where water availability or infrastructure is limited. They are suitable for situations where the pump duty cycle is lower, and the operating conditions do not result in excessive heat generation.
Selection Considerations:
When choosing between water cooling and air cooling systems for a scroll vacuum pump, several factors should be considered:
- Duty Cycle: The duty cycle of the pump, which refers to the ratio of operating time to resting time, can influence the heat generation. Higher duty cycles may require water cooling for efficient heat dissipation.
- Operating Environment: The ambient temperature and availability of water resources in the operating environment should be assessed. Water cooling may be preferred in high-temperature environments or when water is readily available.
- Application Requirements: The specific requirements of the application, including desired vacuum level, pumping speed, and operating conditions, should be considered to determine the appropriate cooling system.
- Maintenance and Infrastructure: The availability of maintenance resources, infrastructure for water circulation, and any specific facility requirements should be evaluated when selecting the cooling system.
It's essential to consult the manufacturer's specifications and guidelines to determine the recommended cooling system for a particular scroll vacuum pump model. This ensures optimal performance, longevity, and reliability of the pump in the intended application.
editor by CX 2024-04-09