Product Description
Product Description
GWSP Oil free Scroll Vacuum Pump
Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.
Basic informations:
1) Model: GWSP600 Oil free scroll vacuum pump
2) Ultimate vacuum pressure: 1 Pa/0.01 mbar (abs.)
3) Max suction capacity: 50Hz-8.7L/s 60Hz-10.4L/s
Safety Precautions:
The GWSP series oil free scroll vacuum pumps are suitable for clean processes only.
Do not pump toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on pumps which have used special gases or other hazardous substances.
Be sure the inlet gas temperature must be lower than 122 °F.
Technical Specifications
| Model | GWSP40 | GWSP75 | GWSP150 | GWSP300 | GWSP600 | GWSP1000 | ||
| Pumping Speed | 50Hz | l/s | 0.5 | 1.0 | 2.0 | 4.3 | 8.7 | 16.6 |
| m3/h | 1.8 | 3.6 | 7.2 | 15.5 | 31.3 | 59.8 | ||
| cfm | 1.1 | 2.1 | 4.3 | 9.3 | 18.7 | 35.8 | ||
| 60Hz | l/s | 0.6 | 1.2 | 2.4 | 5.1 | 10.4 | 20.0 | |
| m3/h | 2.2 | 4.3 | 8.6 | 18.3 | 37.4 | 71.6 | ||
| cfm | 1.3 | 2.5 | 5.1 | 10.9 | 22.3 | 42.8 | ||
| Ultimate Pressure | Torr | ≤1.1*10-1 | ≤6.0*10-2 | ≤4.5*10-2 | ≤1.9*10-2 | ≤7.5*10-3 | ≤7.5*10-3 | |
| psi | ≤2.2*10-3 | ≤1.2*10-3 | ≤9.0*10-4 | ≤3.8*10-4 | ≤1.5*10-4 | ≤1.5*10-4 | ||
| Pa | ≤15 | ≤8 | ≤6 | ≤2.6 | ≤1 | ≤1 | ||
| mbar | ≤1.5*10-1 | ≤8.0*10-2 | ≤6.0*10-2 | ≤2.6*10-2 | ≤1.0*10-2 | ≤1.0*10-2 | ||
| Noise Level | dB(A) | ≤54 | ≤57 | ≤57 | ≤60 | ≤61 | ≤65 | |
| Leakage | mbar·l/s | 1*10-7 | ||||||
| Max. Inlet/Exhaust Pressure | MPa | 0.1 / 0.13 | ||||||
| Ambient Operation Temp. | ºF | 41~104 | ||||||
| Motor 1 phase | Power | kW | 0.25 | 0.55 | 0.55 | 0.55 | 0.75 | -- |
| Voltage | V | 110~115 (60Hz),200~230 (50Hz) | -- | |||||
| Speed | rpm | 1425(50Hz),1725(60Hz) | -- | |||||
| Plug | North America, Europe, UK/Ireland, India | -- | ||||||
| Motor 3 phase | Power | kW | -- | 0.55 | 0.55 | 0.55 | 0.75 | 1.5 |
| Voltage | V | -- | 200~230 or 380~415 (50Hz),200~230 or 460 (60Hz) | |||||
| Speed | rpm | -- | 1425 (50Hz),1725 (60Hz) | |||||
| Inlet/Exhaust Flange | KF25/KF16 | KF40/KF16 | KF40/KF16*2 | |||||
| Dimensions | 1 phase | mm | 326*212*253 | 450*260*296 | 455*260*296 | 493*297*334 | 538*315*348 | -- |
| 3 phase | mm | -- | 450*260*296 | 455*260*296 | 493*297*334 | 538*315*348 | 576*450*402 | |
| Net Weight | 1 phase | kg | 15 | 21 | 22 | 29 | 36 | -- |
| 3 phase | kg | -- | 20 | 21 | 28 | 31 | 54 | |
| Cooling Type | Air cooled | |||||||
| Others | With air flush | |||||||
Features & Benefits
No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 3~60 m3 /h, limited vacuum level 1~8 Pa
Suitable for all type of power supply around the world.
110/220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance
Quality Control
CMM inspection system assures
fixed tolarance on dimension&shape
Pump Testing
Applications
Semiconductor industryindustry.stry
Vacuum sputtering machine.
IC plasma cleaning machine.
IC plasma polishing machine.
IC packaging machine.
IC transmission chamber.
Photoelectric industry.
LED vacuum annealing furnace.
Load lock/transfer chambers.
Glove box.
LED packaging machine.
Liquid crystal injection and packaging.
Material industry.
Vacuum annealing furnace.
Vacuum diffusion oven.
3D metal printing.
Single crystal growth furnace.
Microwave cleaning and microwave drying machine.
E-beam/Laser melting.
Vacuum degassing.
Vacuum gas substitution.
Vacuum equipment.
Oil free ultrahigh vacuum unit.
Oil free vacuum unit.
GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.
FAQ
Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products by ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Years |
| Oil or Not: | Oil Free |
| Structure: | Scroll Pump |
| Exhauster Method: | a Pair of Vortex Plates |
| Vacuum Degree: | Low Vacuum |
| Customization: |
Available
|
|
|---|
Are scroll vacuum pumps environmentally friendly and compliant with regulations?
Scroll vacuum pumps are considered relatively environmentally friendly compared to some other types of vacuum pumps. Here's a detailed explanation:
Environmental Friendliness:
Scroll vacuum pumps offer several features that contribute to their environmental friendliness:
- Oil-Free Operation: Many scroll vacuum pumps are designed for oil-free operation. This eliminates the risk of oil contamination and the release of oil vapor or aerosols into the environment. Oil-free operation is particularly important in applications where a clean and particle-free vacuum environment is required, such as semiconductor manufacturing or research.
- Low Energy Consumption: Scroll pumps are known for their energy efficiency. They typically consume less energy compared to other vacuum pump technologies, resulting in reduced power consumption and lower environmental impact.
- Minimal Maintenance: Scroll vacuum pumps require minimal maintenance, which reduces the consumption of resources and minimizes waste generation associated with pump servicing or component replacement.
- Quiet Operation: Scroll pumps are designed to operate quietly, contributing to a more comfortable and environmentally friendly working environment by reducing noise pollution.
Regulatory Compliance:
Scroll vacuum pumps are designed and manufactured to comply with various regulations and standards, ensuring their safe and environmentally responsible operation. Some of the key regulations and standards that govern vacuum pumps include:
- European Union (EU) Regulations: Scroll vacuum pumps intended for sale or use within the European Union must comply with relevant directives, such as the Restriction of Hazardous Substances (RoHS) Directive and the Waste Electrical and Electronic Equipment (WEEE) Directive. These directives restrict the use of hazardous substances and promote the proper disposal and recycling of electronic equipment.
- International Electrotechnical Commission (IEC) Standards: IEC standards, such as IEC 61010 for electrical safety and IEC 61326 for electromagnetic compatibility, provide guidelines for the safe operation and performance of vacuum pumps and other laboratory equipment.
- Environmental Protection Agency (EPA) Regulations (United States): In the United States, scroll vacuum pumps must comply with environmental regulations enforced by the EPA, such as the Clean Air Act. These regulations aim to reduce emissions of ozone-depleting substances and other pollutants.
- Local and National Regulations: Depending on the jurisdiction, there may be additional local or national regulations governing the use, disposal, or emissions of vacuum pumps. Manufacturers ensure compliance with these regulations to meet the requirements of specific markets.
It is important to consult the manufacturer's specifications, certifications, and compliance statements to ensure that a particular scroll vacuum pump model meets the necessary environmental and regulatory standards for a given application or jurisdiction.
By choosing scroll vacuum pumps with oil-free operation, energy efficiency, minimal maintenance requirements, and compliance with regulations, users can contribute to a more environmentally friendly and sustainable vacuum system.
Do scroll vacuum pumps require water cooling or air cooling systems?
Scroll vacuum pumps can be designed to utilize either water cooling or air cooling systems. Here's a detailed explanation:
Water Cooling Systems:
Some scroll vacuum pumps are equipped with water cooling systems to dissipate the heat generated during operation. Water cooling offers efficient heat removal and helps maintain the pump at optimal operating temperatures. These pumps typically have connections for water inlet and outlet, allowing the circulation of cooling water through the pump's heat exchanger or jacket.
Water cooling systems are commonly used in applications where the pump operates at higher duty cycles or when the ambient temperature is relatively high. They are particularly advantageous when there is a need for continuous or extended operation at elevated vacuum levels, as water cooling provides effective heat dissipation and prevents overheating of the pump.
Air Cooling Systems:
Alternatively, some scroll vacuum pumps utilize air cooling systems. These pumps rely on the circulation of ambient air to dissipate the heat generated during operation. Air cooling systems typically incorporate cooling fins or fans to enhance heat transfer and maintain the pump within the acceptable temperature range.
Air cooling systems are commonly used in applications where water availability or infrastructure is limited. They are suitable for situations where the pump duty cycle is lower, and the operating conditions do not result in excessive heat generation.
Selection Considerations:
When choosing between water cooling and air cooling systems for a scroll vacuum pump, several factors should be considered:
- Duty Cycle: The duty cycle of the pump, which refers to the ratio of operating time to resting time, can influence the heat generation. Higher duty cycles may require water cooling for efficient heat dissipation.
- Operating Environment: The ambient temperature and availability of water resources in the operating environment should be assessed. Water cooling may be preferred in high-temperature environments or when water is readily available.
- Application Requirements: The specific requirements of the application, including desired vacuum level, pumping speed, and operating conditions, should be considered to determine the appropriate cooling system.
- Maintenance and Infrastructure: The availability of maintenance resources, infrastructure for water circulation, and any specific facility requirements should be evaluated when selecting the cooling system.
It's essential to consult the manufacturer's specifications and guidelines to determine the recommended cooling system for a particular scroll vacuum pump model. This ensures optimal performance, longevity, and reliability of the pump in the intended application.
What are the typical applications of scroll vacuum pumps across industries?
Scroll vacuum pumps find applications in a wide range of industries due to their unique advantages and capabilities. Here's a detailed explanation of the typical applications of scroll vacuum pumps across various industries:
1. Laboratories and Research Facilities:
Scroll vacuum pumps are extensively used in laboratories and research facilities for various applications. They are commonly employed in vacuum ovens, freeze dryers, rotary evaporators, and other laboratory equipment that require precise and controlled vacuum environments. Scroll pumps' oil-free operation ensures a clean and contamination-free atmosphere, making them suitable for sensitive experiments and analyses. Their low noise and vibration levels are also advantageous in research settings where a quiet environment is necessary.
2. Semiconductor Manufacturing:
In the semiconductor industry, scroll vacuum pumps play a crucial role in the fabrication and production of electronic components. They are used in processes such as physical vapor deposition (PVD), chemical vapor deposition (CVD), etching, and ion implantation. Scroll pumps provide the required vacuum conditions for these processes, ensuring the deposition or removal of materials with high precision. Their oil-free operation eliminates the risk of oil contamination in the semiconductor manufacturing process, ensuring the quality and reliability of the manufactured devices.
3. Analytical Instruments:
Scroll vacuum pumps are widely used in analytical instruments such as mass spectrometers, electron microscopes, and surface analysis equipment. These instruments require vacuum environments to operate efficiently and produce accurate results. Scroll pumps offer the necessary vacuum levels for sample preparation, ionization, and analysis. Their high pumping speed and deep vacuum capabilities make them suitable for rapid evacuation and maintaining the required vacuum conditions during analytical processes.
4. Medical and Pharmaceutical Applications:
In the medical and pharmaceutical industries, scroll vacuum pumps find applications in various areas. They are commonly used in medical sterilizers, vacuum ovens for drying pharmaceutical products, and vacuum concentrators for sample preparation. The oil-free operation of scroll pumps ensures the integrity and quality of medical devices, pharmaceutical products, and biological samples. Their low noise levels and compact size are advantageous in medical environments where space is limited, and a quiet atmosphere is necessary.
5. Food Processing and Packaging:
Scroll vacuum pumps are employed in the food processing and packaging industry for vacuum packaging, vacuum sealing, and degassing processes. They help extend the shelf life of food products by creating a vacuum environment that inhibits microbial growth and prevents oxidation. Scroll pumps are also used in food freeze-drying processes to remove moisture while maintaining the product's quality and nutritional value. Their clean and oil-free operation ensures the hygiene and safety of the food products.
6. Environmental and HVAC Systems:
Scroll vacuum pumps are used in environmental monitoring systems where they help create vacuum conditions for gas analysis and air quality measurement. They are also utilized in heating, ventilation, and air conditioning (HVAC) systems for vacuum evacuation during the installation or maintenance of HVAC units. The compact size and low noise levels of scroll pumps make them suitable for HVAC applications where space constraints and noise reduction are important considerations.
7. Automotive and Manufacturing:
In the automotive and manufacturing industries, scroll vacuum pumps find applications in processes such as vacuum molding, vacuum lifting, and vacuum forming. They provide the necessary vacuum conditions for molding or shaping materials, lifting heavy objects, and creating airtight seals. The oil-free operation of scroll pumps ensures that there is no risk of oil contamination in the manufactured products.
These are just a few examples of the typical applications of scroll vacuum pumps across industries. Their oil-free operation, high efficiency, low noise levels, and clean vacuum generation make them a versatile and reliable choice in various industrial sectors.
editor by Dream 2024-05-07