Product Description
Product Description
GWSP Oil free Scroll Vacuum Pump
Working principle:
GWSP oil free scroll vacuum pump is constructed with pump head assembly, crank pin assembly, bracket assembly, air flush assembly,and exhaust valve assembly.Two spiral cylinders, 1 offset and orbiting against the other fixed with an offset of 180° to form several crescent-shaped pockets of different sizes. By means of an eccentric drive, the orbiting scroll is made to orbit about the fixed scroll, reducing the volume of the pockets and compressing gas from outside towards the inside thereby pumping the gas from vacuum chamber.
Basic informations:
1) Model: GWSP600 Oil free scroll vacuum pump
2) Ultimate vacuum pressure: 1 Pa/0.01 mbar (abs.)
3) Max suction capacity: 50Hz-8.7L/s 60Hz-10.4L/s
Safety Precautions:
The GWSP series oil free scroll vacuum pumps are suitable for clean processes only.
Do not pump toxic, explosive, flammable or corrosive substances or substances which contain chemicals, solvents or particles.GEOWELL will not perform maintenance work on pumps which have used special gases or other hazardous substances.
Be sure the inlet gas temperature must be lower than 122 °F.
Technical Specifications
| Model | GWSP40 | GWSP75 | GWSP150 | GWSP300 | GWSP600 | GWSP1000 | ||
| Pumping Speed | 50Hz | l/s | 0.5 | 1.0 | 2.0 | 4.3 | 8.7 | 16.6 |
| m3/h | 1.8 | 3.6 | 7.2 | 15.5 | 31.3 | 59.8 | ||
| cfm | 1.1 | 2.1 | 4.3 | 9.3 | 18.7 | 35.8 | ||
| 60Hz | l/s | 0.6 | 1.2 | 2.4 | 5.1 | 10.4 | 20.0 | |
| m3/h | 2.2 | 4.3 | 8.6 | 18.3 | 37.4 | 71.6 | ||
| cfm | 1.3 | 2.5 | 5.1 | 10.9 | 22.3 | 42.8 | ||
| Ultimate Pressure | Torr | ≤1.1*10-1 | ≤6.0*10-2 | ≤4.5*10-2 | ≤1.9*10-2 | ≤7.5*10-3 | ≤7.5*10-3 | |
| psi | ≤2.2*10-3 | ≤1.2*10-3 | ≤9.0*10-4 | ≤3.8*10-4 | ≤1.5*10-4 | ≤1.5*10-4 | ||
| Pa | ≤15 | ≤8 | ≤6 | ≤2.6 | ≤1 | ≤1 | ||
| mbar | ≤1.5*10-1 | ≤8.0*10-2 | ≤6.0*10-2 | ≤2.6*10-2 | ≤1.0*10-2 | ≤1.0*10-2 | ||
| Noise Level | dB(A) | ≤54 | ≤57 | ≤57 | ≤60 | ≤61 | ≤65 | |
| Leakage | mbar·l/s | 1*10-7 | ||||||
| Max. Inlet/Exhaust Pressure | MPa | 0.1 / 0.13 | ||||||
| Ambient Operation Temp. | ºF | 41~104 | ||||||
| Motor 1 phase | Power | kW | 0.25 | 0.55 | 0.55 | 0.55 | 0.75 | -- |
| Voltage | V | 110~115 (60Hz),200~230 (50Hz) | -- | |||||
| Speed | rpm | 1425(50Hz),1725(60Hz) | -- | |||||
| Plug | North America, Europe, UK/Ireland, India | -- | ||||||
| Motor 3 phase | Power | kW | -- | 0.55 | 0.55 | 0.55 | 0.75 | 1.5 |
| Voltage | V | -- | 200~230 or 380~415 (50Hz),200~230 or 460 (60Hz) | |||||
| Speed | rpm | -- | 1425 (50Hz),1725 (60Hz) | |||||
| Inlet/Exhaust Flange | KF25/KF16 | KF40/KF16 | KF40/KF16*2 | |||||
| Dimensions | 1 phase | mm | 326*212*253 | 450*260*296 | 455*260*296 | 493*297*334 | 538*315*348 | -- |
| 3 phase | mm | -- | 450*260*296 | 455*260*296 | 493*297*334 | 538*315*348 | 576*450*402 | |
| Net Weight | 1 phase | kg | 15 | 21 | 22 | 29 | 36 | -- |
| 3 phase | kg | -- | 20 | 21 | 28 | 31 | 54 | |
| Cooling Type | Air cooled | |||||||
| Others | With air flush | |||||||
Features & Benefits
No oil clean vacuum.
No oil back-diffusion, no oil mist exhaust, provide clean vacuum environment
Wide product lineup.
Pumping speed covers 3~60 m3 /h, limited vacuum level 1~8 Pa
Suitable for all type of power supply around the world.
110/220/380/460V, 50/60Hz for choose
Low vibration, low noise.
57~65 dB(A), smooth operation
High efficiency, ease of maintenance.
No water cooled, no oil lubricated, no daily maintenance
Quality Control
CMM inspection system assures
fixed tolarance on dimension&shape
Pump Testing
Applications
Semiconductor industryindustry.stry
Vacuum sputtering machine.
IC plasma cleaning machine.
IC plasma polishing machine.
IC packaging machine.
IC transmission chamber.
Photoelectric industry.
LED vacuum annealing furnace.
Load lock/transfer chambers.
Glove box.
LED packaging machine.
Liquid crystal injection and packaging.
Material industry.
Vacuum annealing furnace.
Vacuum diffusion oven.
3D metal printing.
Single crystal growth furnace.
Microwave cleaning and microwave drying machine.
E-beam/Laser melting.
Vacuum degassing.
Vacuum gas substitution.
Vacuum equipment.
Oil free ultrahigh vacuum unit.
Oil free vacuum unit.
Related Products
GWT40 Foreline Filter
Performance: Filter out the dust particles contained in the intake gas.
Application: Vacuum coating, food and drug processing, ceramic and glass manufacturing, vacuum CHINAMFG and vacuum packaging systems.
GWS16 Exhaust Silencer
Performance: Reduce exhaust noise from oil-free vacuum systems.
Application: Installation of oil free scroll vacuum pumps requires a quiet vacuum system.
GWMMK600 Major Maintenance Kit
Performance: Prolong the service life of the product.
Application: For the major maintenance of oil free scroll vacuum pump GWSP600.
GWTSK600 Tip Seal Kit
Performance: Prolong the service life of the product.
Application: For the scheduled maintenance of oil free scroll vacuum pump GWSP600.
Company Profile
GEOWELL VACUUM CO.,LTD. is a HI-TECH enterprise in China dedicating in manufacturing, research and development, marketing of oil free scroll vacuum pumps and vacuum compressors since 2002. GEOWELL has been providing users and partners with premium quality products that are efficient and dependable, GEOWELL believe the integration of high performance and high reliability product and service will bring the highest value to both our customers and ourselves.
FAQ
Q: How long can I get the feedback after we sent the inquiry?
A: We will reply you within 12 hours in working day.
Q: Are you direct manufacturer?
A: Yes, we are direct manufacturer with factory and international department; we manufacture and sell all our products by ourselves.
Q: When can you delivery the product to us?
A: Since we are a factory with large warehouse, we have abundant products in store, so we can delivery within 7 days after get your deposit.
Q: Can I add logo to the products?
A: Of course, but we usually have quantity requirement. You can contact with us for details.
Q: How to guarantee the quality and after sales service of your products?
A: We conduct strict detection during production from raw material come in to product delivering shipment. Every product must go through 4 steps inspection from casting, machining, assembling, and performance testing within our factory before shipment, also intact packaging test are insured.
Q: What is your warranty term?
A: There is a 12 months warranty for our export products from the date of shipment. If warranty has run out, our customer should pay for the replacement part.
Q: Is the sample available?
A: Yes, usually we send our samples by Fedex, DHL, TNT, UPS, EMS, SF, Depon, it will take around 3 to 4 days for our customer receive them, but customer will charge all cost related to the samples, such as sample cost and air freight. We will refund our customer the sample cost after receiving the order.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(",").forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Yes |
|---|---|
| Warranty: | 1 Years |
| Oil or Not: | Oil Free |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
What safety features are typically integrated into scroll vacuum pump systems?
Scroll vacuum pump systems often incorporate several safety features to ensure safe and reliable operation. Here's a detailed explanation:
1. Overtemperature Protection:
Scroll vacuum pump systems typically include overtemperature protection mechanisms to prevent the pump from overheating. These safeguards can include temperature sensors that monitor the pump's operating temperature. If the temperature exceeds a predefined threshold, the system can activate alarms, shut down the pump, or initiate cooling measures to prevent damage to the pump or surrounding components.
2. Overpressure Protection:
To protect against excessive pressure, scroll vacuum pump systems may incorporate overpressure protection features. These features can include pressure relief valves or burst discs designed to vent or release excess pressure in the system. Overpressure protection mechanisms help prevent damage to the pump, system components, or potential hazards caused by pressure buildup.
3. Motor Overload Protection:
Scroll vacuum pump systems often include motor overload protection to safeguard the pump's motor from excessive current or power draw. Motor overload protection can be implemented through various means, such as thermal sensors or current monitoring devices. If the motor draws more current than normal or operates at a high temperature, the system can activate protective measures, such as shutting down the motor or triggering alarms.
4. Electrical Safety Measures:
Scroll vacuum pump systems adhere to electrical safety standards and incorporate safety measures to protect against electrical hazards. These can include features like ground fault circuit interrupters (GFCIs), circuit breakers, or surge protection devices to mitigate the risk of electric shocks, short circuits, or electrical fires.
5. Emergency Stop Buttons:
Many scroll vacuum pump systems feature emergency stop buttons or switches that allow users to immediately halt pump operation in case of emergencies or safety concerns. Activating the emergency stop button can quickly shut down the pump and associated equipment, preventing further risks or damages.
6. System Monitoring and Alarms:
Scroll vacuum pump systems may include monitoring capabilities and alarms to provide real-time information about the pump's performance and status. This can include monitoring parameters like vacuum level, temperature, pressure, and motor status. Alarms can be triggered if any of these parameters exceed safe operating limits, alerting users to potential issues or malfunctions.
7. Enclosure and Noise Reduction:
Scroll vacuum pump systems often feature enclosures or noise reduction measures to minimize noise levels during operation. These enclosures help create a quieter working environment and reduce noise pollution, contributing to workplace safety and comfort.
It is important to consult the manufacturer's specifications and guidelines for specific scroll vacuum pump systems to understand the safety features they incorporate. Manufacturers can provide detailed information on the safety mechanisms, recommended operating procedures, and any additional safety considerations specific to their systems.
By utilizing scroll vacuum pump systems with integrated safety features, users can ensure the protection of personnel, equipment, and the surrounding environment while achieving efficient and reliable vacuum performance.
Do scroll vacuum pumps require water cooling or air cooling systems?
Scroll vacuum pumps can be designed to utilize either water cooling or air cooling systems. Here's a detailed explanation:
Water Cooling Systems:
Some scroll vacuum pumps are equipped with water cooling systems to dissipate the heat generated during operation. Water cooling offers efficient heat removal and helps maintain the pump at optimal operating temperatures. These pumps typically have connections for water inlet and outlet, allowing the circulation of cooling water through the pump's heat exchanger or jacket.
Water cooling systems are commonly used in applications where the pump operates at higher duty cycles or when the ambient temperature is relatively high. They are particularly advantageous when there is a need for continuous or extended operation at elevated vacuum levels, as water cooling provides effective heat dissipation and prevents overheating of the pump.
Air Cooling Systems:
Alternatively, some scroll vacuum pumps utilize air cooling systems. These pumps rely on the circulation of ambient air to dissipate the heat generated during operation. Air cooling systems typically incorporate cooling fins or fans to enhance heat transfer and maintain the pump within the acceptable temperature range.
Air cooling systems are commonly used in applications where water availability or infrastructure is limited. They are suitable for situations where the pump duty cycle is lower, and the operating conditions do not result in excessive heat generation.
Selection Considerations:
When choosing between water cooling and air cooling systems for a scroll vacuum pump, several factors should be considered:
- Duty Cycle: The duty cycle of the pump, which refers to the ratio of operating time to resting time, can influence the heat generation. Higher duty cycles may require water cooling for efficient heat dissipation.
- Operating Environment: The ambient temperature and availability of water resources in the operating environment should be assessed. Water cooling may be preferred in high-temperature environments or when water is readily available.
- Application Requirements: The specific requirements of the application, including desired vacuum level, pumping speed, and operating conditions, should be considered to determine the appropriate cooling system.
- Maintenance and Infrastructure: The availability of maintenance resources, infrastructure for water circulation, and any specific facility requirements should be evaluated when selecting the cooling system.
It's essential to consult the manufacturer's specifications and guidelines to determine the recommended cooling system for a particular scroll vacuum pump model. This ensures optimal performance, longevity, and reliability of the pump in the intended application.
How does the scroll design contribute to the reliability of these pumps?
The scroll design of vacuum pumps plays a significant role in enhancing their reliability. Here's an explanation of how the scroll design contributes to the reliability of these pumps:
1. Sealed System:
The scroll design features two interleaved spiral scrolls, one fixed and one orbiting. The interaction between these scrolls creates a series of crescent-shaped chambers. As the orbiting scroll moves, these chambers decrease in size, compressing and expelling gases. The tightly sealed system of the scroll design ensures minimal leakage, preventing the entry of contaminants and maintaining a consistent vacuum level. This sealed system enhances the reliability of scroll vacuum pumps by minimizing the risk of performance degradation and ensuring continuous and efficient operation.
2. Oil-Free Operation:
One of the key advantages of scroll vacuum pumps is their oil-free operation. Unlike other types of pumps that rely on oil lubrication, scroll pumps utilize a dry mechanism. The scroll design eliminates the need for oil lubrication by using non-contacting, self-lubricating materials such as PTFE (polytetrafluoroethylene) or carbon. This eliminates the risk of oil contamination in the pumped gases or the vacuum chamber. The absence of oil also reduces maintenance requirements and enhances the reliability of the pumps by eliminating the potential for oil-related issues, such as oil degradation, leaks, or mechanical failures.
3. Minimal Moving Parts:
The scroll design features a relatively simple construction with minimal moving parts. Compared to other types of pumps, scroll vacuum pumps have fewer components that can wear out or malfunction. This reduces the likelihood of mechanical failures and improves the overall reliability of the pumps. The simplicity of the scroll design also contributes to ease of maintenance and servicing, further enhancing their reliability and uptime.
4. Low Vibration and Noise Levels:
The scroll design of vacuum pumps results in smooth and quiet operation. The absence of reciprocating pistons or vanes, which are common in other pump designs, reduces vibration levels. This lower vibration minimizes the stress on pump components, reducing wear and tear and improving the overall reliability. Additionally, the low noise levels of scroll pumps make them suitable for applications that require a quiet working environment, such as laboratories or medical facilities.
5. Contamination Resistance:
The scroll design of vacuum pumps offers inherent contamination resistance. The absence of oil lubrication eliminates the risk of oil carryover or oil-related contamination. Additionally, the sealed system and non-contacting scroll surfaces reduce the chances of particulate contamination or wear debris generation. This contamination resistance contributes to the long-term reliability of the pumps by minimizing the potential for performance degradation or damage to sensitive components.
In summary, the scroll design of vacuum pumps enhances their reliability through a sealed system, oil-free operation, minimal moving parts, low vibration and noise levels, and contamination resistance. These factors make scroll vacuum pumps a reliable choice for various industrial applications.
editor by Dream 2024-05-15