Vapor oil and gas restoration vacuum pump Software
Vapor oil and gas recovery vacuum pump is a relatively consummate pump for oil-gasoline restoration, doing work under the ambient temperature at -40~60°C. It can be used individually or as a component of oil-gas recovery system in fuel stations, which is mostly employed for oil-fuel recovery, to minimize pollution and save strength.
With the increasing necessity on having benefit of environmental pollution and power effectively, this Vapor oil and gasoline recovery vacuum pump will be applied to this subject broadly.
Structural Attribute
Characteristic of NP80 sequence oil-gas recovery vacuum pump: a shaft dived by motor is fastened on the pump body, and its a single conclude in the pump human body is fixedly related a crank which is jointed to a connection rod a piston in liner with reciprocating motion is set on the best of the connection rod, and the liner is set in the pump body a valve seat assay above the piston has inlet valve and outlet valve which are check out valves. Aside from, the inlet cavity and outlet cavity on the pump body are linked with the inlet valve and outlet valve respectively by means of a pipeline, the inlet cavity is related with the coupling of an air eliminator, and a single finish of the coupling is connected with the hose by means of the hose coupling the hose with internal and external casing is linked with nozzle.
Framework diagram:
Observe: There are six electrical wires and five colours in WDVP-a hundred
one) Blue ,white ,brown connect 380 Voltage power.
2) There are two black electrical wires join 220 Voltage electricity. (One particular connect 220 voltage energy, yet another link Zero)
3) The yellow one connects Serra.
4) The relaxation (blue, white, brown) needn't connect.
5) Only two blacks control the function.
Specification
l Rotary vane vacuum pump
l Pump with motor, no affect the gas dispenser typical procedure
l Compact measurement, self-lubricating Functionality
|
CZPT Specification |
||
|
Model |
Solitary PUMP Head |
Double Pump Head |
|
Max. Stream Charge |
65 L/Min |
a hundred and twenty L/Min |
|
Working temperature |
-25~+50 °C |
|
|
Max.Vacuum |
.07MPa |
|
|
Motor Velocity |
2800RPM |
|
|
Motor Electricity |
370W |
|
|
Power CZPT |
380V/50Hz or 220V/50Hz |
|
|
Noise |
≤70dB |
|
|
Connection |
one/4" |
3/eight" |
Characteristics
Effortless installation and maintenance: eliminate the 4 screws to get rid of the pump head for simple installation and maintenance High vacuum amount assures clearing of flooded vapor hoses. Available for Self-contained Suction Pump Dispenser and submersible Pump Dispenser. Self-contained & solitary stage two electricity supply, safe and efficient. Handles twelve fueling positions with 6 nozzles in simultaneous complete circulation operation. Low noise, slow temperature rise.
1) Robust applicability: a small and sturdy composition, the pump head can be put in at several angles, providing much more comfort for the modification of the tanker b applies to ethanol gasoline, methanol gasoline.
two) Reduced sounds design and style: sound does not exceed sixty two decibels.
3) Support life: Soon after strict existence and safety check, the service existence is ≥60000 hrs.
4) CZPT protection steps: The hearth escape valve is geared up with inlet and outlet ports.
|
Bundle Info |
Each Vacuum pump fastened by foaming,then in a carton.
|
|||
|
Product |
Size 1.026 |
N.W(kg) |
G.W(kg) |
|
|
Voltage |
One/Double |
|||
|
380V |
Solitary |
365*275*245 |
12.32 |
thirteen.05 |
|
|
Double |
490*275*245 |
14.22 |
14.95 |
|
220V |
Solitary |
430*275*245 |
14.32 |
fifteen.05 |
|
|
Double |
525*275*245 |
sixteen.22 |
16.95 |
